Recently, a friend of mine had purchased a Mindflex, an affordable and fun electronic toy that kids love. My friend was looking for ways to enhance his little robot. After a lot of searching, he managed to find some Mindflex robotics clay. He decided to use the magnets in his new robot. That is when I decided to make my own Mindflex Mod.
To make this easy to work robot, I used four magnets and two sets of simple magnets. I wrapped the magnet wires around the tracks of the Mindflex so that it would be harder for the robot to run off the wire. I soldered the wires onto the magnetic brackets. After that, I used some black and white paper to cover the front part of the Mindflex and made a cover for it with some electrical tape.
The next thing that I did was to attach the batteries to the brackets and wires. Then, I placed some clear plastic over the little black board to keep the wires and the batteries from getting messy. I wired up the sensors so that when the Mindflex moves, it will detect the little magnets and trigger the battery pack. Finally, I attached the little robot to my stepper and set it to run away.
The Mindflex has some sensors built in. One detects movement and flashes light. If the robot walks into any power wire, then it stops. Otherwise, it gets excited and does its trick.
The only parts of the Mindflex that I had trouble attaching were the batteries and the sensors. The biggest problem was that I didn’t know how to properly attach them. Fortunately, I have some handyman friends who could help me. Once I got those two parts on the robots, I attached the rest of the parts and it worked like a charm 1.16.5.
So now my Mindflex craft is flying around my yard. It’s not only fun to play with, but it’s a great activity for kids to do. You can get creative and make crafts based on the mod. If you’re at a loss about how to start, I would suggest looking up how to make a Mindflex. You’ll have fun learning how to make magnets and making your own game.
For adults looking to relax, they can build their own Gravity Gun to blow bubbles. This will also help them get into the mood. With the blocks, you can actually make your own game too. Simple puzzles based on the Mindflex concept are a great way to end the game.
To finish my game, I attached a magnet underneath the balloons. Now all the fun is in flying through space! With a little imagination, you can come up with countless ways to play this game. Enjoy! !